This Dodge ram 2500 shocks review isn’t only for describing the best Dodge Ram shock absorbers, it’s much more than a review. Undoubtfully, shock absorbers are the most crucial parts which are capable of making your ride smooth and safe.
However, these parts can provide a big difference in everyday driving. For that, you simply need to continue reading the options we have analyzed for you. In principle, a Dodge ram 2500 is used for heavy cargo transportation.
Even this activity is necessary to perform on the highway as well as on rough roads. So, in these cases, the shock absorbers become very important for a good result.
Best Shocks for Dodge Ram 2500 Diesel
The 10 Best Dodge Ram 2500 Shocks Review 2021
In this sense, you don’t have to invest many hours in finding the best option. Below we analyze the ten best shock absorbers and the basic aspects of each of these parts. We also consider some important additional aspects about Dodge Ram 2500 shocks.
01. Bilstein 24-164870 4WD,Silver Steering Damper for Dodge
Among the components that can improve the performance of a Dodge Ram 2500 are these shocks. In this case, these are shock absorbers that can improve anyone’s ride. At the same time, some high-quality features are included here to provide excellent service life.
Among the best features that this component can offer is an optimization of the Ram 2500’s steering. This is necessary since this is a vehicle that must traverse both conventional roads and off-road trails. In this case, these shocks offer a superior result compared to the factory shocks.
At the same time, the user here will be able to notice the minimal movements in the steering can be damped. So, the user inside the vehicle will be able to enjoy a more pleasant ride.
Along with that, vibrations are also reduced, and this can be especially noticeable in older vans. So, it’s an excellent choice to implement these dampers right away.
Here, one of the best resistance and durability has also been implemented is due to the design that this shock absorber has. In particular, it is a zinc coating that is very durable against the most damaging factors of use.
However, these shock absorbers have also been manufactured with other materials of excellent quality. As is very common with Bilstein, this is a steering damper that can offer an excellent service life. So, if you need to replace your current shocks that are nearing their useful life, this is one of the best options.
Even these shocks are thoroughly tested so that you can check the high quality included.
In this case, this is a steering damper that is highly compatible with different models of Ram 1500, 2500, and 3500. So, people who get this steering damper cannot use it on a 2004 to 2007 Ram 2500 pickup truck.
Beyond that, it can also be retrofitted to an all-wheel-drive for a more uniform result. Finally, any person can do the installation in a few steps. Here only a few tools and some basic knowledge are needed to be able to implement this part.
Of course, this can be very useful to keep some pocket money safe. In just a few steps, you will be able to use this steering damper on your Ram 2500.
- Zinc coating
- Reduces natural vibrations
- Excellent service life
- Only for Ram 2500 from 2004 to 2007
Read more: Best Exhaust System for Dodge Ram
02. Bilstein 5100 Longevity Durability Gas Shock Absorbers Dodge Ram 2500 4WD
When people want to implement a complete shock absorber replacement, it is advisable to opt for this option. In this case, it is a set of monotube gas shocks that can be perfect for a full-ride pickup truck. Also, this can easily provide other very useful features for the owner of a Ram 2500.
As we have already noted, Bilstein is one of the most reliable manufacturers when it comes to shock absorbers. So, this set of monotube gas shocks can optimize the ride when using a Ram 2500.
At the same time, this vehicle will be able to travel on different roads or off-road trails. So, the functionality of each of these shocks provides the exact result. In case, a comfortable, controlled and stable ride can be obtained at all times.
Particularly, the oil incorporated in each of these shock absorbers works in combination with a dividing piston. In this way, the shock absorber can cope with heat build-up by preventing viscosity loss and aeration. Thus, it is a shock absorber ready for any situation.
As mentioned, each of these shock absorbers has a monotube gas charged inside. So, the performance and durability are superior compared to other shock absorbers in the market. Also, anyone can get up to 2.5″ in the back and one inch of front lift.
For the installation procedure here, main pieces are incorporated. That is why the user will be able to count on nuts, bushings and washers included. Also, some factory parts such as mounting bolts are needed in the mounting step.
All in all, a user with some tools and knowledge can perform the mounting step of the shock absorbers.
- Front and rear lift
- Excellent performance and durability
- Parts included for installation
- Installation not so easy
Read more: Best Fender Flares for Ram 1500
03. Rough Country N3 Easy Bolt-On Installation Dodge Ram Truck
Some people with a Ram 2500 may opt for a steering stabilizer for better results. This is the ideal component to be able to count on stable steering along with any kind of rough road. In this case, it is a part that is compatible with a 1994 to 2012 Ram 2500.
In principle, one of the best features is that the user will be able to notice better handling and control of the vehicle at all times. As the name suggests, this steering stabilizer controls the pickup truck more efficiently.
In turn, these parts work in conjunction with the shock absorbers to enjoy a high level of stability. As if that were not enough, the performance that these steering stabilizers can provide is adequate.
Both vibration and unintentional movements are reduced considerably. So it can be an excellent way to enjoy better steering off-road or on-road.
To offer the best result, these components have been manufactured with high durability materials. So this can provide excellent service life to care for all pieces. Even these steering stabilizers can reduce front end vibration and uncontrolled steering.
Of course, this helps to take care of the lifespan of different pieces in the Pickup.
Anyone here will have all the necessary components to be able to perform the installation process. So, this is complemented by a special design of these parts. In particular, the easy installation design allows anyone to have a few common tools. All this is what is necessary to install these parts in the garage of any home.
- Simple installation
- Reduced steering shocks and vibration
- Provides more stable steering
- Intermediate durability
Read more: Best Exhaust for 5.9 Cummins
04. Bilstein 5100 94-13 High Quality Shocks Front Pair for Dodge RAM
In this case, it’s a pair of front shocks that are perfect when it comes to a Ram 2500. The compatibility here covers full-shrink pickup trucks. So, users who have a 1994 to 2013 model Ram 2500 will be able to implement these parts for better results on the road.
In principle, here, users can get a lift of up to 2.5 inches. So, this is a very efficient feature for some Ram 2500 pickup trucks. These types of vehicles are often used for heavy cargo transportation. With which, these shocks prevent the truck from sinking too much towards the ground.
Simply put, these shock absorbers can be the best choice to provide a great service life to all related components. With that, any user will be able to notice a much more stable steering and reduced vibration. For that, it is only necessary to note that this is a pair of Bilstein shock absorbers, i.e., of high quality.
Excellent Service Life
From time to time, it is really necessary to replace the shock absorbers as they have a useful life. When this happens, Bilstein shocks are a great and reliable way to care for your vehicle. These shocks are manufactured with the highest quality parts and design.
So, this can be more than enough for excellent service life and a great driving experience.
Compatibility and Installation
As we have mentioned, those who have an all-wheel-drive pickup truck will be able to implement these parts. In particular, the compatibility covers Ram 2500 and 3500 trucks from 1994 to 2013. At the same time, the installation procedure can be less complicated when users have some tools and knowledge.
- High-strength, high-quality shocks
- Up to 2.5-inch lift
- Wide compatibility with Ram 2500 and 3500
- Front shocks only
Read more: Best Air Filter for 6.7 Cummins
05. Rancho RS5000X Gas Shocks Set Dodge Ram with 2-3″ Leveling Kits
Another one of the most recommended options on the market is this set of monotube gas shocks. This is a complete set to replace all the shocks on a Dodge Ram 2500 and 3500. In this sense, the compatibility covers all-wheel-drive pickup trucks.
In this case, it is worth mentioning that these shocks are specially designed to perform better than the factory parts. In particular, it is a pressurized twin-tube gas shock absorber. Thus, the performance of the RAM 2500 truck will be far superior compared to the factory parts.
Additionally, it is also necessary to mention that these shock absorbers reduce the effects of each impact as well as excessive temperature increases. All this allows taking care of the service life of these shock absorbers and other related components.
Also, these shocks can withstand a high level of heat throughout the lifetime.
Of course, one of the main advantages of these parts is the great durability they can offer. Even the great strength of each of these parts will withstand the most intense use of a RAM truck. Thus, anyone will have the ability to get an extensive lifespan by implementing this set of gas shocks.
When performing the installation process, the factory shock mounting bolts should be reused. At the same time, this gas shock set includes nuts, bushings, washers, and everything needed for installation.
So, the user only needs to have the proper tools if they want to avoid hiring a professional. With the right knowledge, these parts can be put to use.
- Excellent service life
- Front and rear lift
- Parts included for installation
- Compatibility with 4WD vehicles
Read more: Best Programmer for 24V Cummins
06. Freedom OffRoad Premium Quality Lift Extended Nitro Shocks
To continue analyzing the high-quality options available in the market, we find these front and rear shocks. In this case, this is a set of parts compatible with a 1994 to 2012 model year Ram 2500 and 3500 pickup truck.
Even some Ram 1500 pickups from 1994 to 2001 are also compatible. In particular, these parts are compatible with all-wheel drive.
Each of these shocks can provide much better performance than the factory shocks. In this regard, this set of shock absorbers provides the ability to reduce vibrations and shocks produced on rough roads. However, it’s a great piece for driving a Ram truck off-road.
In this regard, 2003 to 2012 Ram trucks can get a 1-inch to 3-inch lift. That RAM pickup that is up to 2002 can get a lift of up to 2 inches. Either way, this is an excellent lift for using a RAM pickup truck for heavy-duty hauling.
Of course, another great advantage of using these shocks is the durability and strength for everyday use. At the same time, each of these components features a silver powder-coated finish.
No doubt, this can be excellently complemented by the highly durable materials from which these shock absorbers are manufactured.
Here the installation procedure is not much more difficult compared to other shock absorbers. While it may take some time, the truth is that all four shocks can be replaced. With some tools and knowledge, the installation will not be that difficult. Even this can be adequate to get even wear and tear.
- Acceptable front and rear lift
- High-quality strength
- Broad compatibility with Ram trucks
- Installation not suitable for hobbyists
07. Bilstein 5100 24-191203 Monotube Gas Shocks Compatible with Ram 2500 3500 4WD
When it comes to replacing only the rear shocks, these gas monotube shocks are one of the best options. In this case, compatibility covers several models of the Ram 2500 and 3500 trucks. All of these trucks must have an all-wheel-drive design.
After installing these parts, it is possible to notice a better ride on all types of roads. Undoubtedly, this can be of great use when it comes to on-road or off-road trails. Even a Ram 2500 pickup truck is highly useful for towing or heavy hauling. Having good shock absorbers is something very necessary.
So it is also necessary to consider that these rear shocks can provide a rear lift of up to 2.5 inches. However, users will be able to carry heavy loads up to the maximum capacity. In this sense, the Ram truck will not sag too much, thanks to the optimal lift of these shocks.
As mentioned above, Bilstein shock absorbers are specially designed to offer excellent service life. Even a large number of people have mentioned that the service life can be extended up to 100,000 miles with proper usage.
Therefore, the high performance and performance that comes with these shocks is not the only advantage.
For the installation procedure Here, the factory shock mounting bolts must also be reused. Beyond that, along with these rear shocks, nuts, reservoir clamps, bushings, and washers have been included. So, the user only needs to have a few tools to be able to install these parts.
- Easy installation for advanced users
- Excellent rear lift
- Long service life
- Front shocks not included
08. Fox 2.0 Performance Shock Set Compatible with 1994-2013 Dodge Ram
To continue investigating high-quality options, we must mention this excellent performing set of shocks. Here the compatibility covers Dodge Ram 2500 and 3500 all-wheel-drive pickup trucks. So, vehicles that are from 1994 to 2013 will be able to use this set of shocks.
In this case, it is necessary to consider that the rear and the front lift is excellent to get the precise result. Users who need to transport heavy loads need a certain lift on their pickup trucks. That is why by implementing this set of shocks, you get up to 1 inch of rear lift and up to 2 inches of front lift.
As if that were not enough, these shocks can reduce vibrations and shocks during use. Thus, the user will be able to notice the superior on-road and off-road performance from the start. Undoubtedly, it is excellent for giving the Dodge Ram 2500 pickup truck greater versatility on all types of roads.
In particular, this aspect is the resistance that these shocks can offer. According to many users, the durability of these shocks is among the highest in the market. With which, this may be because this is a set of shock absorbers manufactured with high-strength materials. So, this can be seen from day one.
To be able to perform the installation procedure, different accessories are included that are necessary. So, the owner of the pickup truck will count here with nuts, reservoir clamps, washers, and bushings.
All this prevents the user from needing to spend more money on these small parts to install the shocks.
- Complete set of parts
- Excellent rear and front lift
- Wide Ram compatibility
- For all-wheel-drive vehicles only
09. Bilstein 5100 High Quality Monotube Gas Shocks Set
Without a doubt, mechanical experts always recommend replacing all four shock absorbers. So, if you want to do this complete replacement, this shock absorber set is recommended. In this case, you get monotube gas shocks that provide excellent characteristics from day one.
Of course, this is a high-quality shock absorber set because the manufacturer is Bilstein. So, after installing these parts, you can notice an improvement in the control and balance of the Ram 2500. At the same time, this set of parts is compatible with Ram 2500 all-wheel-drive from 2003 to 2012.
Additionally, you can get a rear lift of 6 to 8 inches and a front lift of 6 to 8 inches. So, this is one of the best options for those who use their Ram 2500 to its maximum hauling capacity. So, this high lift is also excellent for traversing uneven terrain or difficult surfaces.
In particular, this set of shocks can lessen shock and vibration. Also, the lifespan that these shocks can offer goes up to 100,000 miles. Even the specific design of these shock absorbers can deal with the most intense uses or high temperatures.
Compared to other shock absorbers on the market, this set of parts includes all the necessary accessories for installation. So, here the user does not have to invest more money in buying all the complementary parts.
Thus, this facilitates the installation procedure, which will only require a few tools from the user. In just a few steps, these shock absorbers will be able to do their job.
- Complete set of parts
- Great front and rear lift
- Quick and easy installation
- Special tools required
10. Rancho RS5000X Lift Systems Shock Set Comfortable with Dodge Ram 2500 4WD
Last but not least, this set of gas shocks can be perfectly adapted to various models of Dodge Ram 2500. In particular, these shocks fit all-wheel-drive pickup trucks from 1994 to 2002. So, all users who have this type of vehicle will be able to improve the steering and driving experience.
By installing this set of parts, a decrease in vibration and shock absorption can be noticed. So, installing these parts means getting a much more pleasant and smoother ride. At the same time, this is necessary since a Ram 2500 pickup truck is often used on rough roads or uneven surfaces.
In the same vein, the rear and front lift system provide 1.5 inches of maximum lift. Undoubtedly, this can compensate for the Ram truck’s sag when hauling heavy loads. Besides, the gas inside each of these parts prevents high temperatures and excessive wear.
Just great elements with real quality and resistance are incorporated here. This enables the shock absorbers to withstand a wide range of temperatures over their entire service life. Also, many users have found that these shock absorbers can offer a long service life.
Of course, the secondary pieces for the mounting process are included here. All these can ease the installation procedure and avoid hiring a professional. So, if a user has some specific tools and knowledge, he can install these shock absorbers.
In other words, these shocks can be the perfect replacement for a Ram 2500.
- Proper front and rear lift
- All necessary accessories included
- Easy installation for many users
- Only for Ram 2500 up to 2002
Best Shocks for Dodge Ram 2500 Diesel: Must Have Factors
Here we have already considered excellent shocks for a Ram 2500. Beyond that, the analysis might not be the most complete if you don’t consider some relevant aspects. So, below, we can mention some essential features to consider in your next shocks.
In this way, you would be able to choose the precise parts that your Dodge Ram needs.
One of the results that any user expects the most is undoubtedly the kind of ride they can get. So, the best shock absorbers should provide a stable, smooth ride without jerky movements. Of course, shock absorbers that do not offer these characteristics are certainly the wrong choices to avoid.
Either way, the right shocks should be useful not only for driving on a highway. Especially, a Ram 2500 pickup truck is a vehicle that is often used on off-road trails as well. So, the exact shock absorbers should adapt to the difficult surfaces by decreasing the impacts.
In combination with that, shocks many times can offer different types of rear and front lifts. In particular, this can be very useful when it comes to hauling heavy loads with a Ram 2500. Whether it’s rough terrain or heavy cargo, a good lift keeps the vehicle from touching the ground.
In this case, durability is in tune with the service life that can be obtained by implementing shock absorbers. Of course, the shock absorbers you install should withstand general use and even heavy operation. To do this, you need to consider the materials from which each shock absorber is manufactured.
Sometimes you can find a special coating to prevent rust and moisture on the metal parts. Conversely, rusting of a shock absorber drastically decreases the life you can get out of these parts. So to get the maximum functionality out of shock absorbers, you need good durability.
So also, some shock absorbers can withstand a broad spectrum of heat, as well as different degrees of stress. All of that can provide longer service life but also more reliable and safer operation.
Level of Control
In many situations, the controllability of each shock absorber is not that important until you encounter a bump in the road. Whether it’s a pothole or another road imperfection, it could throw the vehicle out of control at some level.
That’s why accurate shock absorbers should provide an excellent level of control and stability. In many cases, the shock absorbers are specially prepared to withstand such situations. This is all the more important when you have to traverse off-road roads and difficult surfaces.
This is usually the case with rural roads and people who have to carry different types of loads. Additionally, an optimal level of control can also offer a use more convenience of the Ram 2500. So, the level of control of shock absorbers can be much more important than many people realize.
Level of Adaptation
Unlike the previous characteristics, the level of adaptation allows shock absorbers to perform well in any situation. In particular, this can be very useful for users who must traverse different types of roads or terrain. Regular quality shock absorbers may offer a rough ride in these situations.
However, the level of shock absorber tuning can not just offer a great use of the vehicle. In combination, shock absorber adjustability can also protect the vehicle and the load to be transported. All of which is very positive for avoiding further damage to vehicle components or heavy loads.
Finally, another aspect you will want to consider is pricing. Here, it’s not necessary to invest much money to get good quality shock absorbers. Even the best options are not necessarily the most expensive shock absorbers. So, it is better for anyone to have an average budget.
This is necessary because cheaper shock absorbers may offer poor performance. Believe it or not, the wrong shocks could be the cause of future repairs to your vehicle. It may even be necessary to buy new shocks ahead of time as well.
So, to avoid all that, it is advisable to purchase good quality shock absorbers. With this, anyone can be certain of an excellent shock absorber life. Also, all related components will be able to work in a better way.
Dodge Ram 2500 Shocks Review’s Crucial FAQ’s
Q: What shocks give the smoothest ride?
Ans: To find shock absorbers that can provide a really pleasant and comfortable ride, some aspects must be considered. First of all, compatibility is important for a successful shock absorber installation. Beyond that, the quality and materials from which each shock absorber is constructed are decisive.
In particular, the best shocks for Dodge Ram 2500 diesel should offer a high level of vehicle control and adaptability. In other words, this means that the best shock absorbers can adapt to any type of difficult terrain.
Even in these difficult terrains, the control should be adequate so that the driver can enjoy a smooth ride throughout the entire journey. So, these few aspects may be more than enough to be able to find the best shock absorbers.
Q: Why is Bilstein shocks better?
Ans: Many users mention that these shocks are the most appropriate because of the design and manufacture of each unit. Each of them has a patented monotube gas that is charged inside each shock.
In particular, this technology has been patented, as it includes a technique superior to other options on the market. In particular, heat can be dissipated more successfully and efficiently thanks to this design. Here, excessive heat does not reach the outside of the shock absorber.
Even the oil expands thanks to the dividing piston. This prevents not only temperature rise but also aeration. So it is this specific function of these shock absorbers that gives them a much longer service life. Any user here will not have to deal with a loss of viscosity or foaming.
Q: Why are Bilstein shocks so expensive?
Ans: There is a very simple explanation why these shocks are more expensive than most of today’s options. For one thing, they require high-quality materials that can offer superior tolerance in intense situations.
This quality of materials is what convinces many users when choosing these shock absorbers. Beyond that, along with these materials comes a highly efficient, German-made design. All this combination results in high-quality shock absorbers that can offer an excellent service life.
Even these shock absorbers are widely popular and chosen despite the cost of each unit. Simply put, here, users can protect their vehicles in a better way.
Q: Are reservoir shocks worth the money?
Ans: In this day and age, mechanical experts claim that these types of shocks are worth the money because of the advantages they can offer. In principle, these reservoir shocks can provide excellent service life, decreased component wear as well as less pressure build-up.
Of course, all these advantages are highly valued by users. Either way, many of the shock absorbers we have reviewed can provide these same advantages. Even the compatibility is usually not the same when it comes to a Dodge Ram 2500.
On the other hand, many reservoir shocks do not have an overly simple installation. So, to find the most appropriate option for your Dodge Ram 2500, we recommend looking at the shocks we have mentioned.
Q: Do shocks make the ride smoother?
Ans: When a user chooses good shocks for a vehicle, the ride should be much more comfortable and smoother. In principle, both the braking and acceleration of a vehicle are much more efficient if the shocks provide excellent stability.
However, choosing good shock absorbers does not only result in a smooth and comfortable ride throughout the entire trip. Additionally, the best shock absorbers can provide greater adjustability and control on different roads.
In particular, this may be most important because of the rough terrain used in a Ram 2500. At the same time, this type of vehicle is often very useful when it comes to carrying a heavy cargo of some kind. That is why having good shock absorbers is necessary.
Q: Do shocks make a difference?
Ans: The moment a user implements good shock absorbers on a vehicle, it is possible to notice the difference. At the very least, the user will notice a decrease in vibrations and bumps from rough terrain.
Either way, a Ram 2500 without shocks can traverse any type of road. However, the ride is much less comfortable and smooth. Even the load carried by a Ram 2500 could take more impact from the unevenness of the road.
Nowadays, it is really necessary to have excellent Dodge ram 2500 shocks. So, you will be able to find the exact option for your vehicle by reading this Dodge ram 2500 shocks review. Unlike what many users think, the best shocks can make a difference from day one.
Especially, these kinds of parts are really necessary to get a smooth and stable ride. Besides, carrying heavy loads is much more efficient when these shock absorbers are incorporated. The cargo to be transported will be much better protected throughout the trip.
You don’t even need a big budget to be able to find high-quality shock absorbers. After installing the exact option for you, you will notice that your trips are much more pleasant on-road or off-road.