Dodge Ram 1500-Hemi is one of the finest and convenient as a daily vehicle. We can bet, you often realize to swap its exhaust system with best exhaust system for Dodge Ram 1500 Hemi.
Without doubt sure you’re one of the many who need to improve your exhaust system. If that’s the case, it is a task that can be difficult and overwhelming due to the diversity of exhaust systems.
However, we have researched the best options for you to improve the performance of your Dodge Ram 1500. Therefore, in this review, you will find the best exhaust for dodge ram hemi.
Best Sounding Exhaust For Ram 5.7 Hemi
While it is a powerful vehicle you will be able to reach the maximum potential with one of these systems. The most appropriate exhaust system will be an excellent replacement for your current system.
The 10 Best Exhaust System For Dodge Ram 1500 Hemi Review 2020
In this case, you will be able to count on a series of really efficient and useful advantages. On the other hand, you will avoid purchasing a poor-quality exhaust system.
This is an important aspect since the wrong exhaust system can damage the entire operation of your truck.
01. Flowmaster Stainless Steel Construction Exhaust System With Outlaw Muffler Kit
Among the first options that are available today this ejection system can provide excellent performance for your truck. So, you will be able to optimize the operation of your vehicle by applying this accessory.
In particular, it is a unit that is constructed of high-quality stainless steel. So, the durability is of a high standard.
High Level of Performance
In this case, it has been considered a design that provides high performance from the first use. An oval shape has been included for the silencer. This reduces the noise level generated by the exhaust system.
Additionally, you will notice a more efficient operation without the annoying noise generated by other models.
Excellent Diameter for you
On the other hand, we can mention that it is an accessory built in the United States. So, the quality level is high and provides effective operation.
At the same time, the diameter of the tube provides about 3 inches of use. So, it is an option that can provide excellent results for your vehicle.
Appropriate Outlet Diameter
About the output diameter, you will have 2.25 inches. The silencer is of the welded deflector type. You will be able to acquire this accessory that provides an excellent relation between cost and benefit.
Besides, the installation is very simple to perform, so you will not lose time in this procedure.
- Accessories made of stainless steel
- Excellent performance
- The Silencer is oval
- Output diameter of 2.25 inches
02. Flowmaster Direct-Fit Exhaust System for Dodge RAM Includes Hangers
Another model that can be of high convenience is this direct fit exhaust system. It is one of the best-suited models for the Dodge Ram 1500 engine.
Here too, high strength stainless steel has been used. So, you will be getting an accessory that provides an excellent service life.
The generated noise level can disturb a large number of users. That is why this is an exhaust system that produces a low noise level.
The outside exhaust produces only moderate noise that will not disturb anyone. So, this is an additional aspect that may be of great importance to certain people.
Some exhaust systems can provide complicated installations. In this case, you should not worry about this inconvenience since the installation is very easy and quick to perform.
The hardware and hangers that are useful for this procedure are included in the entire package. By properly following the instructions you can have your new exhaust system up and running in just a few steps.
Additionally, the tuned dyno can provide high performance from the first use. Also, we can mention an output diameter of 2.25 inches, along with an input diameter of 3 inches.
Therefore, it is an excellent option to modify your vehicle’s current exhaust system. In turn, the reliable and safe operation allows you to improve the performance of your Dodge.
- Fast installation
- Stainless steel
- Moderate sound
- Recommended for intermediate use
03. Total flow Durable Stainless Steel Exhaust System With 18 Inch Muffler Direct Fit
In case you need an exhaust system with extended service life, then this model may be the most appropriate. In particular, it is a direct-fit exhaust system with excellent advantages. In this case, it is a unit that is compatible with Dodge Ram 1500 that are 2009-2018 models.
Low Noise Level
On one hand, an 18-inch 09-18 muffler is included. So, this feature allows you to greatly reduce the noise level generated by your exhaust system.
Therefore, you will notice that the sound generated is deep and has a soft tone. This is a convenient option that outperforms others available today.
You will be able to use this exhaust system safely, as the service life is extensive. To achieve this, 409 stainless steel has been used in the construction of the part. In turn, MIG welding allows this system to provide excellent performance over a long period.
Besides, the installation is very easy to perform, so you will not find any inconvenience in this regard.
We can add that the design of this unit provides optimization of your vehicle. On the other hand, the sound level is adequate, but also the performance of your vehicle’s engine is higher.
For this, the inlet diameter is about 3 inches while the outlet diameter is 2.25 inches. So, you’ll be getting an exhaust system that won’t let you down.
- Made of 409 stainless steel
- Extended lifetime
- 18-inch silencer
- Adaptable to Dodge Ram 1500 2009-2018
04. Total flow 214633 Y-Pipe Muffler 1500 Direct Fit Exhaust Dodge Ram With Stainless Steel
Another excellent option we can list is this Y-pipe silencer. This is a part that can be adapted to the 2009-2018 Dodge Ram 1500 vehicles. So, your vehicle will have an excellent level of efficiency combined with a smooth tone of the generated sound.
It is also a part that is very easy and quick to install.
As we have seen in the previous model, 409 stainless steel was also used in the manufacture here. So, the Y-tube silencer can provide an extended service life.
Also, it is a unit that is highly durable against corrosion and shock in general. So, you are getting a part that provides reliable operation.
As we have mentioned, the installation process is very easy to perform by any type of user. No welding is required to start enjoying the benefits of this unit.
Therefore, all the necessary accessories are included in this procedure. So, you don’t need to give too much time to apply this part to your Dodge.
Efficient and Reliable Design
Since it is an exhaust silencer system, the noise level is acceptable. A deep, soft-toned noise can be noticed. On the other hand, you will have an inlet diameter of 3 inches, along with an outlet diameter of 2.25 inches.
So, you can take advantage of the manufacturer’s experience in producing high-performance parts.
- 409 stainless steel part
- The soft and deep noise level
- Simple installation
- Only suitable for certain Dodge models
05. B2 Fabrications – Accessories Exhaust System With 18 Inch Magnaflow Muffler Hemi
As we continue to investigate the options that are available today this part assembly is another of the most suitable. The vast majority of experts consider it a set of craftsmanship that enhances the performance of their Dodge.
In this case, it is an accessory exhaust system with an 18-inch muffler.
If this is your first change of exhaust system, installation may be somewhat difficult. However, you should not worry about this process since this set of parts does not require cutting and welding.
Instead, all the necessary accessories are included for you to perform the installation yourself. So, you will notice that in a few steps these parts will be ready.
One of the positive points of this exhaust system is the design of the parts. A straight and tight design has been considered to fit the exhaust pipes.
This way both these parts and the exhaust pipes will be completely straight. Therefore, this allows more efficient operation of the exhaust gas produced in the combustion.
Acceptable Service Life
About the useful life, we can mention that you will count on safe and reliable use. So, it is a set of parts that provide a high quality of materials.
The manufacturer’s extensive experience allows you to optimize the performance of your Dodge from the first use. Besides, you’ll achieve a smooth, deep noise level that won’t cause discomfort.
- Simple installation
- Effective design
- Soft sound level
- Intermediate durability of materials
06. B2 Fabrications – Simply Remove the OEM 14 Inch Dodge Ram Muffler Exhaust System
In case the previous option has not convinced you, this model is also one of the best. In this case, this exhaust system with a 14-inch muffler provides excellent performance and a low sound level generated.
Also, all the necessary accessories are included so that you can carry out the installation process yourself.
In terms of efficiency, this set of parts can be adapted to the operation of your Dodge Ram 1500. Besides, this set of parts has an adjustable and straight design.
This way, the whole exhaust system will be completely straight for a more efficient exhaust. The straight design means that there are fewer obstacles in the way of the exhaust.
As with the previous model, you will not need to weld or cut any parts. All the accessories needed for you to mount and adjust this exhaust system to your vehicle are included. So, this installation procedure will not overwhelm you at all.
Good Quality and Lifetime
On the one hand, we can mention that it is a set of parts that provides excellent performance and durability. You will notice that these parts are resistant to corrosion and shock. Therefore, you will get a reliable operation for a long period.
- Efficient design
- Fast installation
- Excellent service life
- 14-inch silencer
07. Flowmaster 817477 Cat-Back Dual Rear Exit Exhaust System With Aggressive Sound
While for some the sound may be annoying, for others the loud sound is important. That’s why this dual rear exhaust system may be suitable for them.
Having these parts in your Dodge vehicle means the noise level produced is aggressive and loud. This makes it possible to get a vehicle that is more suited to some people’s personalities.
By purchasing this set of parts, you will get reliable operation for a long time. Stainless steel has been used for the outlet tubes. In turn, the 16-gauge and bent mandrel design provides highly efficient exhaust.
This allows you to optimize the design of your vehicle from the first use of this part.
These days, the best exhaust systems provide parts with simple installation. This unit in particular is another one of them. So, you’ll have all the accessories you need for quick installation.
You can use the included hardware and hangers to mount this exhaust system. No cutting or welding of any kind is required.
On the one hand, the tuned dyno provides a high level of performance for your vehicle. Besides, excellent quality materials have been used in the manufacture of these parts.
So in this case, you will also be able to obtain efficient and also reliable operation. Your vehicle will have the aggressive sound you are looking for.
- Stainless steel part
- The sound level is aggressive
- Fast installation
- The sound could disturb others
08. MBRP Mirror Polished 3 Inch Cat Back Single Side Exhaust System
Another of the most important aspects of an exhaust system is the level of durability. If you don’t want to spend a lot of money on it, this option may be the most suitable.
In this case, it is a part that is constructed of t-304 stainless steel. Together with this, the mirror polishing gives it a nice design for everyone to see.
Single Output System
In this case, it is a single-ended but highly efficient exhaust system. So, it’s an excellent choice if you want to change your current exhaust system on a limited budget.
Also, the high-strength materials in this part provide an excellent level of durability. Besides, aluminized steel provides excellent impact and corrosion resistance.
Your Vehicle is Optimized
By installing this exhaust system, you will have certain advantages for the operation of your vehicle. For one thing, you will be able to get more efficient fuel usage.
You can improve this usage by 1 or 2 mpg. In turn, both the power and the torque of your Dodge Ram 1500 are increased. So, you’ll have a more powerful vehicle.
You will have all the necessary accessories to carry out the installation of this piece. Besides, it will not be necessary to use welding machines or make cuts.
With just a few hand tools you will be able to assemble and install this exhaust system in your vehicle. You will notice that the noise level is smooth and deep. So it won’t be a bother to anyone.
- Stainless steel tip
- 3-inch diameter
- Optimizes vehicle operation
- Single output system
09. Solo Performance Y Pipe Muffler With Compatible Dodge Ram 1500 Exhaust System
In case you require high performance for your vehicle, this exhaust system is another recommended one. In this case, it is a set of parts that are made of highly durable stainless steel.
Pipes, hangers, and clamps are also included, so you can make a simple installation without wasting time.
For those looking for a high-efficiency exhaust system, this unit has the right features. Also, it is a set of parts that does not bypass the emission system. Therefore, the stainless steel of this unit can withstand heavy and intense engine work.
In this case, you will also not need to count on cuts or welds. On the contrary, all the necessary accessories are included for you to start enjoying the benefits. Besides, the direct bolted fit will save you time in the installation process.
You can improve your vehicle’s performance by installing this exhaust system. In turn, the sound level generated is aggressive, harsh, and deep.
So, your Dodge Ram 1500 will have a unique personality and style. Plus, the inlet diameter is 3 inches, while the outlet diameter is 2.25 inches.
- Stainless steel parts
- Strong, aggressive sound
- Fast installation
- Intermediate shock resistance
10. Borla Stainless Steel Cat-Back Dodge RAM 1500 Exhaust System
Last but not least, this last option manages to offer one of the most complete operations. To begin with, we must mention that these parts are made of high resistance and durability stainless steel.
The resistance against corrosion and impact is also one of the most appropriate.
Split Rear Exit
To provide more reliable and efficient operation, this exhaust system provides a split outlet. Therefore, this will allow you a more powerful and efficient exhaust at all times.
Besides, this allows you to optimize engine performance as well as improve fuel economy. Also, this exhaust system can be installed through the bumper of your Dodge Ram 1500 Hemi.
Excellent Level of Durability
As we have mentioned, each of these parts is made of high-strength stainless steel. Besides, you will have an output diameter of 5 inches. So, you will notice that it is possible to obtain an excellent level of performance when installing this set of parts.
Therefore, this means reliable and safe operation over time.
As with the best options available today, the installation of these parts is quick and easy. No welding is required to assemble this exhaust system.
Plus, it’s a design that fits perfectly with the Dodge Ram 1500 Hemi. You’ll notice the time required for installation is very short. Therefore, you will be acquiring an option with an excellent cost-benefit ratio.
- Stainless steel parts
- 5-inch tip diameter
- Highly efficient operation
- Expensive option
What is the Exhaust System?
Generally, most engines produce some kind of reaction and combustion in their operation. In turn, this operation produces certain gases that need to be expelled.
Therefore, the exhaust system is in charge of expelling the gases produced during the engine’s reaction. It is also a system of pipes that guide the gases to the outside of the engine and/or vehicle.
Also, an exhaust system may include one, two, or more exhaust pipes. In reality, this depends on the specific and overall design of the engine. Besides, an exhaust system must be designed to handle harmful and toxic gases.
So, an exhaust pipe is supposed to expel and keep these gases away from the user of the vehicle or machine.
There are a lot of gases that are expelled by an exhaust pipe that is highly dangerous for people. Some of these gases can be nitrogen oxides, carbon monoxide, and hydrocarbons.
So, an efficient exhaust system must prevent these gases from being inhaled by the user inside.
Besides, many accessories can be included in an exhaust system. One of the best known is the silencer that is applied to an exhaust pipe. As its name indicates, this accessory seeks to reduce the noise level produced by the exhaust system.
Different Types of Exhaust System
While an exhaust system is responsible for removing the gases produced during engine operation, not all designs are the same. That is why 5 different systems need to be mentioned.
Single Exhaust Pipe
This is one of the most common exhaust systems among the vast majority of new and used cars. When considering other vehicles such as trucks and vans, this exhaust system can also be found.
So, in this design, the exhaust system has only one outlet. In turn, this pipe is located at the rear of the vehicle. We can safely say that it is not the most efficient exhaust system.
However, it is the most used option for wholesale vehicles since its construction is very cheap for the manufacturers.
Double Rear Exhaust Pipe
When it is a sport or high-performance vehicle, the internal combustion of the engine is higher. In this case, a double-ended exhaust system is required which is located at the rear of the vehicle.
Also, it is one of the most efficient systems because they can expel a large amount of gas.
In this case, it is an exhaust system that takes advantage of the curvature of the wheels. In particular, a filtering process is added here that provides greater efficiency.
This type of system is generally used in vehicles that transport or two important loads.
Dual Side Exhaust
As the name implies, this system incorporates two exhaust pipes that are located together on one side of the vehicle. In general, these systems produce deeper sounds because they have smaller pipes.
These are the most expensive systems compared to the others, but they offer the highest degree of efficiency. Specifically, gas filtration is one of the most appropriate.
So, they can provide higher performance to a vehicle.
Best Sounding Exhaust For Ram 5.7 Hemi User Buying Considerations
While the products we have listed can provide excellent benefits, they are not all the same. There are some key aspects to consider before choosing one of them.
In this way, you will be acquiring an ejection system that is specifically tailored to your needs. Therefore, you can more easily find the best exhaust system for Dodge Ram 1500 Hemi.
The materials with which an exhaust system is constructed is perhaps the most important aspect in the first place. This is a feature that will tell you how long a certain exhaust system will last and how it will perform.
Generally, it is best to find an exhaust system that is made of stainless steel.
In this case, different steel finishes are used to manufacture this system. Besides, the finishes that are incorporated into an exhaust system are grouped into four options. Therefore, 409 stainless steel, silver ceramic, titanium, or chrome-nickel are usually used.
Concerning chrome-nickel, the level of corrosion resistance is considerable. Although it can be discolored somewhat quickly, the initial shine is very attractive. To find a good resistance to heat and corrosion, we can mention silver-plated ceramics.
Another option that can resist corrosion and heat is a titanium ceramic coating. Along with this, it provides the highest durability is 409 stainless steel, although it also discolors quickly.
Although it could be a secondary aspect, the fact is that the diameter of the ejection system contributes to the quality of the results. Also, the right diameter in an exhaust system can provide for easier and faster installation than others.
To better position ourselves, we can mention that the average size is between 2.5 and 3 inches.
If you purchase an exhaust system smaller than this diameter, then you will likely be disappointed with the results. So, this is an important feature when purchasing a new exhaust system.
That’s why throughout this review we have considered only those options that provide the most appropriate pipe diameter for you.
Tube Tip Diameter
Along with the pipe diameter, it is also important to consider the diameter of the pipe end. Generally, these two aspects do not provide the same diameter in an ejection system. In turn, the sound level generated is primarily related to the size of the pipe end.
Also, as this diameter is larger than the exhaust pipe will provide higher performance. This is why it is a more expensive option the larger the diameter.
We can find a diameter between 4 and 5 inches in the best options. So, if you want to get excellent sound quality from your exhaust system then you should consider a diameter of 5 inches.
It is necessary to include this point since not all ejection systems provide the same installation procedure. Some options may provide a system that is easier to install than others.
In this case, it is important to consider the additional accessories that a given option may provide. In turn, a certain design may provide a simpler procedure than others. In this way, the time it takes to install such a system can be optimized.
Sound Level And Quality
You can easily notice that when you accelerate your truck, a certain level of noise is produced. At the same time, not all noise generated by the same engine and the same model of truck is the same.
So, it is important to consider this aspect if you want your truck to make a certain level of quality of sound. It is also an additional aspect that can be unpleasant or pleasant, and that is why it is important.
You may find some exhaust systems that produce a sound that is too aggressive. In this case, you may notice that the level and quality of sound generated are similar to a roar. On the other hand, other exhaust systems provide different sound quality.
So, the sound generated is similar to thunder rumbling and bass.
As a third option, you may find certain exhaust systems that produce intermediate or moderate sounds. So, you may notice that the noise level and quality is smooth. So, you should consider this aspect so that you are not disappointed with an unpleasant sound.
Other Additional Features
Another aspect to consider is the specific brand of your next exhaust system. In this case, not all brands can provide the same life span. So, it will be an important aspect to avoid future repairs earlier than expected.
Additionally, an exhaust system of questionable quality could damage the overall performance of your truck. In fact, in some cases, an exhaust system could end up exploding inside. So, buying a cheap option may end up being more expensive due to the damage.
On the other hand, there are certain features that some systems may offer. The most popular include a split rear outlet construction or a leak-proof design. These are secondary features that can increase the functionality of the system.
So, it’s a good idea to make a list of modifications so that your next exhaust system can meet all your needs. You will notice that there are several aspects to consider.
This is why we have selected the best 10 options available on the market today. So, your most accurate and appropriate choice will be easier to achieve.
All You Need To Know About Best Sounding Exhaust For Ram 5.7 Hemi
Q1: What is the most convenient welding method?
A: In this case, we should mention that not all exhaust systems require the same welding job. Some options do not require this type of work at all. However, in those options that do require it, we can list the two most known options.
So, these two options are tungsten handle and metal inert gas welding. About the fastest and easiest method to perform by most users, undoubtedly the last option.
It is the most convenient option because it only requires 75% CO2, 25% argon gas, and a coil of wire.
Q2: Which exhaust system provides the longest life?
A: To answer this question, we will consider the four most commonly applied types of exhaust systems on vehicles. On the one hand, we can mention that 409 stainless steel is the option that can provide the longest life.
Besides, the level of resistance to shock and corrosion is one of the highest.
On the other hand, when we talk about heat resistance, we can mention an exhaust system that has a titanium ceramic coating. However, the level of durability is not the same as for 409 stainless steel.
Q3: Is the tungsten welding method better than using inert gas?
A: To indicate which one is better than another we must clarify this. In this case, we are not mentioning which of the two options can provide you with a higher level of welding quality.
Also, each of these methodologies may provide certain advantages and disadvantages in particular.
Concerning tungsten welding, it is possible to achieve work with a higher level of strength and durability. To be able to use this method, tungsten, and pure argon electrode is required.
On the other hand, metal welding with inert gas is easier and faster to perform by any user.
Q4: When is it necessary to weld an exhaust system?
A: A common question is whether welding should be applied when the system is properly fitted to your truck. In this case, we should mention that some options that are available today do not require welding.
This is why some exhaust systems can provide quick and easy installation.
Some systems have the accessories and parts necessary to connect directly to your truck. The level of compatibility is also one of the broadest, relative to different trucks.
So, no welding is required. However, you should check beforehand that your next exhaust system will provide a weld-free installation.
Q5: How do you install a dual exhaust system?
A: First, you should verify that the installation of your system does not require welding. Of course, the most convenient options will be those that do not require this type of work. So, without welding or cutting, the installation will be easier.
First of all, you must place your truck at a certain height. This way you can install the exhaust system more comfortably. Then you should remove the screws and parts that hold your old exhaust system in place.
Once you have removed your old system, you must assemble your new exhaust system and make sure it fits properly. Then put all the pipes and clamp together. You can finish by tightening all the parts and end screws.
Q6: How can the life of an exhaust system be extended?
A: There are a few ways to extend the life of an exhaust system. One way is to properly maintain it using certain accessories. One is to use a lubricant spray when you are loosening and tightening each bolt.
This way, the screws, and bolts will wear out more over time. In turn, it is advisable to apply a good quality lubricant to the clamps and bolts regularly.
Q7: What is the best exhaust system for a truck?
A: As mentioned above you should consider certain key aspects of an exhaust system. You should then list your preferences for the operation of your next exhaust system. The most important aspects are the efficiency level, durability, and sound level produced.
In turn, these features will prevent you from purchasing an inexpensive, questionable quality exhaust system. Along with this, a good exhaust system should provide quick and easy installation. Even the best option you choose should not require any welding.
Q8: Is the power increased with straight pipes?
A: It is possible to mention that straight pipes allow increasing the efficiency of the exhaust system as well as the engine. In this case, the amount of engine back pressure is reduced due to the design of the exhaust system.
Thus, the gases produced during engine combustion are released with less hindrance and more freedom.
In this case, it is recommended to use this type of exhaust system in high-performance vehicles. Therefore, if you do not need to increase the power of your vehicle, this exhaust system will not be the most suitable.
These days there are a lot of exhaust systems to choose from. That’s why modifying any system on a truck is not easy to decide. To make it easier, we have listed the options that offer the best overall performance and durability.
So, you can find the best exhaust system for Dodge Ram 1500 Hemi in just a few steps. Therefore, you won’t be overwhelmed if this is the first modification you make to your truck.
In turn, we have considered the best opinions from users of each of the exhaust systems listed here. So that you can avoid spending time and money on an exhaust system of questionable quality. Even choosing the wrong exhaust system can damage the overall operation of the truck.
Finally, after a quick installation, your truck will be running better. From this point on you will be able to enjoy better transport of your vehicle.