People who want their Ford trucks to deliver an improved performance than ever before must buy the best 7.3 Powerstroke mods. With these performance upgrades, they can get several benefits out of their Ford trucks.
So, the obvious question arises, why would you need the performance upgrades for 7.3 Powerstroke? The reason being, as a truck owner, one would always want their vehicle engine to deliver optimum horsepower, improved torque strength (especially if one is looking for an enhanced towing capacity), engine durability, etc.
Best 7.3 Powerstroke Mods
|TS Performance Part # 1180406 Diesel Performance Horsepower/Fuel Economy Switchable Chip||Buy On Amazon|
|Banks 42210 Cold Air Intake System||Buy On Amazon|
|HJ fuel pump powerstroke m61067 diesel fuel pump f350 lift pump SP1013MP mechanical fuel pump for 1994 ford 1997 f250 7.3 fuel Powerstroke V8 7.3L F250 F350 F59 1994-1997 E350 F6TZ-9350-A||Buy On Amazon|
|DieselSite Billet Turbo Compressor Wicked Wheel 2 for 94-03 Ford Powerstroke 7.3L||Buy On Amazon|
|Injector Sleeve Cup Removal & Installation tool with Parts Kit For 1994-2003 Ford Powerstroke 7.3L and Navistar T444e||Buy On Amazon|
With high-performance upgrades, an engine is benefited in numerous ways, one of the significant benefits being durability. Numerous drivers have to drive on treacherous roads more often than not.
Top 5 Best 7.3 Powerstroke Mods
Hence, the engine has to run through tougher situations leading to wear and tear. With these performance modes, engine durability is enhanced.
Let’s take a look at few performance upgrades that will do the 7.3 Powerstroke a world of good!
01. TS Performance 1180406 Switchable Chip
One very significant upgrade for the Powerstroke is the TS Performance Part # 1180406. With such an upgrade, a user will have more power delivered to their engine since it will improve the towing capacity.
Besides, such upgrades are ideal for those vehicles used for racing too.
Once a user installs this performance upgrade, they’ll have more power delivered to the rear wheels, which a few other chips in the market won’t do. Hence, the wheels can run at optimum speed, and one doesn’t have to worry about its wear and tear.
Using such a device, a user’s driving experience is enhanced. With this chip, one gets have increased torque and horsepower, but it also strengthens the shift points. With such firm shift points, the truck can slip into the gear and not slam into it.
Such a performance chip offers different settings, as many as six, which one can access by just turning on the knob situated on the dashboard. All these settings offer other functionalities and are equally useful.
A few of them are High-idle, Stock, 50 HP, Anti Theft, 100 HP, 140 HP, Vallet, etc.
Another significant feature of this chip is that there will be no 605 computer code left on the PCM for anyone to detect. There isn’t anything to worry about once the computer is reflased by the dealer.
Such a chip will run at all four pages of the vehicle computer. One can simply plug the chip, and the power will be available.
Such a kit is easy to install. One can easily slide it into the vehicle PC, and it gets fit without any problem. A user will not need to tape it. An instruction manual is available, which one needs to follow, and they can install this device on their own.
- Six setting levels
- Firmer shift points
- It runs on four pages of the computer
- Easy to install
- Sometimes installation can be tricky
02. Banks 42210 Best Cold Air Intake System for 7.3 Powerstroke
For those who want their engine to offer an upgraded performance regarding horsepower and torque, the Banks 42210 Cold Air Intake System is a must to have.
Such a device ensures the Powerstroke engine has a longer life and offers an optimum driving experience.
People want a performance upgrade to deliver more power to the engine. With this Cold Air Intake System, this feature is guaranteed. Such a device ensures one gets agility along with power.
Therefore, the engine will deliver optimum performance now and in the long run too.
With this cold air intake system, fuel economy is guaranteed. Therefore, there is no worry as far as fuel saving is concerned. One can save a lot on their mileage with this efficient device.
Such an intake system is designed to accommodate more cold air into the engine. Hence, it ensures that the engine remains cool irrespective of the miles it runs. Besides, it also helps in engine movement to run faster, smoother, and for a long time.
Such an intake system has a giant filter which helps in high-flow filtration.
With this device, one gets an enclosed housing that prevents hot and power-draining air from getting to the engine. This way, the engine’s longevity is enhanced, and there is no need to replace them.
Besides, it also prevents the engine’s components from damage, and due to its longer service life, there isn’t any need to clean them frequently. Thus, one gets an added advantage with this device.
Alongside this, one can access the filter to monitor and clean it.
Installing this intake system is easy. All one needs is to follow the installation manual and do it on their own. Therefore, they can save a lot on installation expenses and any charges related to a mechanic.
- Smooth airflow
- Enclosed housing
- Easy to install
- Might have fitting issues
03. HJ 7.3 Powerstroke Fuel Pump
Such a high-performance upgrade is ideal for the engine to enhance its service life and prevent wear and tear. One of the reasons that the HJ Powerstroke fuel pump is one of the best 7.3 Powerstroke mods is because they pump more energy into the engine, thereby enhancing its efficiency.
Advanced Filtration Benefits
One can expect from this performance upgrade the advanced benefits of filtration, which safeguards the Powerstroke injection system. Thus, it helps to extend the service life of both injectors and the injection pump.
Such a filtration system is highly rated and comes with a water separation filter (in-built) and an enhanced air or vapor removal process.
Such fuel pumps are ideal for all Ford Powerstroke engines. Whether a user is running an E-350 Econoline or a Superduty like F59,250, 350, etc., this device is fit to all and guarantees a supreme performance for the engine.
Helps to Keep the Fuel Clean
One significant advantage that this pump offers is that it continually polishes the fuel. It keeps a positive pressure on the fuel that gets into the engine and thus prevents galling, scoring, cavitation, etc.
After this, it returns the fuel to the tank after filtering it, thus removing air, dirt, vapor, water, etc. Therefore, one is going to have polished fuel always.
Limits Fuel Flow
Such a system ensures that unnecessary fuel won’t drain out from the engine. It has an enhanced technology that provides a limited fuel flow, thereby saving a lot. Such a pump not only limits fuel flow but reintroduces air back into the fuel.
Easy to Install
One other advantage of this system is that it comes with the necessary bots and mounts, making it easy to install them. Such bolts can easily fit into any Ford engine frame. Therefore, one doesn’t need to worry about any vehicle specifications.
- Advanced filtration
- Fuel economy
- Easy installation
- It isn’t available with copper banjo bolt seals
04. DieselSite Ford Powerstroke 7.3L Billet Turbo Compressor
As far as drivability, engine power, performance, etc., is concerned, there is hardly anything better than the DieselSite Billet Turbo Compressor.
Such a compressor ensures an engine never runs out of gas and continues to deliver a supreme performance all through the drive.
Such a compressor boosts the turbo due to its wicked wheel. Thus, one can get optimum power delivered to the engine. Due to the wheel’s structure, it provides ultimate control over the engine and helps in improving the service life.
Who doesn’t want better drivability for their engine? With this performance mod, this feature will be guaranteed. Once installed in the vehicle, a user can undoubtedly enjoy a supreme driving experience like never before.
Such a wheel is placed strategically at the factory. Thus one can save a lot of effort and time too.
A DieselSite Billet Turbo Compressor will always enhance engine efficiency. Thus, one can draw out more from their engine. Besides, such a tool also ensures the engine runs through a lot of wear and tear. Therefore, the engine can run more efficiently than ever before.
Such a compressor comes with a wastgate actuator (BigHead). Thus, it helps deliver an additional five to ten psi boost and a turbo surge (completely eliminated) even on the hottest of tunes.
This one is an ideal option for those who don’t want to spend a lot on buying new housing or turbo.
Installation is Easy
Such a compressor comes with an easy installation guide. Therefore, one can easily get it install without the help of an expert. Along with the kit, one gets bolts and mounts, which makes the installation job easy.
- Drivability feature
- Easy to install
- Threads can be damaged
- Wheels are similar to stock not billet
05. Auto Parts Prodigy Injector Sleeve Cup Removal & Installation Kit
One can efficiently remove the injector sleeves from in combustion engine (internal) with such a kit. Such a toolkit makes this sleeve removal process from the diesel easy due to the best upgrades for 7.3 powerstroke several accessories it brings with the equipment.
Such a tool comes with supreme design with the highest quality material, which can help to do the work speedily and allow a user to get back to the road quickly.
This tool is also efficient to work with cylinder heads and is good enough to reach those problematic real cups that are otherwise tough.
With this tool, it is possible to clean all the different engine areas so that it runs effectively. Thus, the engine can stay well for a long run and perform well even in the most challenging road conditions.
Such a brush set cleans the injector bore properly. Efficient cleaning of the injector bore is necessary so that the fuel installer cup can seat the cup properly.
The Injector Sleeve Cup Removal comes with a high-quality steel tap (high-speed), making the cup removal process easier. Such a material quality ensures they are one of the top brands available in the market.
Such a tool kit lasts long no matter how many times one uses them. Because this is a branded product in the market, so longevity comes as an assurance with this toolkit. Thus, a user does not have to worry about wear and tear these parts or worry about their longevity.
Such a toolkit comes with a broad range of accessories, making them useful for almost all Ford vehicles. An Injector Sleeve Cup Removal is suitable for all F250, 350, and 450 trucks, and thus it goes well with nearly all models as far as compatibility is concerned.
- Bolts might break
Best 7.3 Powerstroke Mods: Expert’s Selections
Before a user goes for the best upgrades for 7.3 powerstroke, one has to decide on what features they want to include to enhance the vehicle’s performance and deliver optimum output.
Therefore, while buying a performance upgrade, one has to be mindful that what these upgrades bring to the table. It is important to note that one must look for those upgrades that are useful as far as the Powerstroke is concerned.
Cold Air Intake
We all know how important it is to keep the Powerstroke engine cool. No one wants an overheated engine to suddenly break down and halt a driver in the middle of the road and unforeseen circumstances.
Therefore, having a quality cold air intake system is vital for the engine. With this, one can transmit fresh and cold air into the Powerstroke, and thus the engine can operate at full throttle.
Besides, an intake system has a tube that allows for more fresh air, and its mechanism prevents to get the hot and moisture draining air which can damage the engine.
Alongside this, there is also a useful filter available with this kit that ensures any dust, debris is filtered from the air, and only the fresh air gets to the engine.
One other upgrade is the performance chip which ensures maximum power is delivered to the engine. Buying such a kit will provide a vehicle’s towing capacity is enhanced. These are quite useful for r aching vehicles too.
One must know that a performance chip delivers more power to the rear wheels. Such a facility isn’t available with all the chips in the market. Therefore, with an efficient performance chip installed, the vehicle can run with more speed, thanks to the power delivered to the wheels.
However, a few other things that a user must look for while buying a performance chip include vehicle compatibility. Whether a user is running an F250, 350,450, 550 trucks, a performance chip must be compatible. Not all chips go with all Powerstroke; therefore, look for the vehicle’s make and model.
Ease in the installation is the next thing that one must look for. No one wants to buy something that takes hours to install or needs a mechanic, thereby wasting a lot of money. Buying a chip whose installation process is easy holds the advantage over other chips available in the market.
For delivering more power to the engine, a fuel pump plays a key role. Therefore, buying a pump with benefits that are key to the Powerstroke is vital.
A quality fuel pump will boost the engines’ performance by delivering fresh and filtered fuel from dirt and debris and dirt, and with this, an engine’s efficiency is enhanced by certain levels.
Another effective performance upgrade is the turbo compressor. Look for buying those that have wheels that enable the engine to run at optimum capacity levels. Besides, a few come with balance at the factory, which saves time and money.
With these upgraded features in the vehicle, one can get the most out of a Powerstroke, and it’s sure to deliver at full potential as far as engine efficiency is concerned.
With this, we come to an end of the review for the best 7.3 Powerstroke mods. Those looking at what upgraded features they would want in their Powerstroke must have a fair idea about them by now.
However, for any more queries, a user can go through the links from Amazon mentioned above to see for more product specifications and find out a few more details about the products before deciding to buy one.
Not only this, but there are a few other performance upgrades too that are available in the market, and one can check them also to find something most suitable for their Powerstroke.
No matter what a user chooses, the most important thing is to pick a product(s) that guarantees the engine not only optimum performance but a longer service life too.
One must also take a look at the manufacturer’s brand, years they have been in the field, etc., which also denotes the product quality. Thus, go through the products once more and bring the latest performance upgrades for the engine so that next time when you travel in the Ford with the family, you get ultimate driving pleasure.